Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   Feature Suggestion Forum (https://www.propellerheads.se/forum/forumdisplay.php?f=7)
-   -   Little tweaks (https://www.propellerheads.se/forum/showthread.php?t=127598)

ljekio 2010-07-31 10:44

Little tweaks
 
I propose to make a slight beneficial changes in the Record:

1. Mono button on the Master channel
2. Choice of channel strip indicator - PPM/VU/Peak, like on Master channel.
3. Extend DDL-1 (or new delay device) for increase the buffer delay to 8 sec.
4. –ěption cancel of automation as performance controllers - yes,
this old abandoned feature will not have a Record 1.5.
Sometimes I prefer to edit a separate lane of automation, but not couple with a midi-events.

ljekio 2010-07-31 13:23

5. Keyboard shortcut for option "Show navigators"

Truhse 2010-07-31 13:47

Totally agree at the first point. :)

ljekio 2010-08-01 11:52

6. Remove unused parts of imported audio / delete silence

ljekio 2010-08-09 19:14

Autofades for audioclip in Record
 
7. Recording audio need option "autofade edges for clips" (typically 5-10ms), so will no clicks between clips.

ProfessaKaos 2010-08-10 05:54

1 & 2 I would like to have

xonox 2010-08-11 01:25

If you want longer delay, you can always chain delay devices together. I use 2 DDLs connected together serially. 0 feedback. I return the 2nd DDL output into a channel strip and use the send control to create feedback this way.

You can get multiple bars of delay this way. It's not as easy but it works.

selig 2010-08-11 01:33

Quote:

Originally Posted by ljekio (Post 766327)
7. Recording audio need option "autofade edges for clips" (typically 5-10ms), so will no clicks between clips.

That actually already exists, with a 10 ms crossfade applied to each clip boundary. Problem is, when you "Join Clips" these autofades go away!!!

3rdFloorSound 2010-08-11 05:49

Quote:

Originally Posted by ljekio (Post 763067)
4...
Sometimes I prefer to edit a separate lane of automation, but not couple with a midi-events.

Yes! I miss this.

ljekio 2010-08-11 14:18

Quote:

That actually already exists, with a 10 ms crossfade applied to each clip boundary. Problem is, when you "Join Clips" these autofades go away!!!
I was recorded the audio, change the boundaries of loops and had clicks on the borders of loop.
Razor tool leads to similar results.
After it I make crossfade manually.
Quote:

If you want longer delay, you can always chain delay devices together.
I'm exactly doing, but it is inconvenient, and limiting in 2 seconds does not give time delays of 16/16 beats if less than 120 BPM.
If you use the RV-7000, it is impossible to make an endless feedback because of the built nondisconnectable EQ and Hi-Damper.
Yet another in DDL-1 is strange - at long endless feedback (I'm want to made Loop-machine for live) eventually lost synchronization with the metronome click.


All times are GMT +2. The time now is 13:10.