Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   Feature Suggestion Forum (https://www.propellerheads.se/forum/forumdisplay.php?f=7)
-   -   Mono button? (https://www.propellerheads.se/forum/showthread.php?t=158989)

TomWa 2012-05-06 16:30

Mono button?
 
I'm surprised there is no mono button in the master section of the mixer. Am I just missing it? (My apologies if this issue has already come up in the forum...)

Does anyone know a quick way to check your mixes in mono?

Thanks,

Tom

MayorMcCheese 2012-05-06 17:35

From Propellerhead's James Bernard: https://www.propellerheads.se/forum/...2&postcount=14 .

SNB1 2012-05-06 17:44

Quote:

Originally Posted by TomWa (Post 1048684)
I'm surprised there is no mono button in the master section of the mixer. Am I just missing it? (My apologies if this issue has already come up in the forum...)

Does anyone know a quick way to check your mixes in mono?

Thanks,

Tom

Put a line mixer inside a combi. Pan channel 1 hard left and channel 2 hard right. Route your master output into the line mixer with the left channel in 1 and right channel in 2. route the mixer output to your hardware device in the rack. Now program the combi to where button 1 solo either the left or right side.

TomWa 2012-05-06 18:38

Thanks... That will work, but seems a little clunky. I wonder if 6.5 will have this?
Tom

Exowildebeest 2012-05-06 19:01

Quote:

Originally Posted by SNB1 (Post 1048712)
Put a line mixer inside a combi. Pan channel 1 hard left and channel 2 hard right. Route your master output into the line mixer with the left channel in 1 and right channel in 2. route the mixer output to your hardware device in the rack. Now program the combi to where button 1 solo either the left or right side.

That's splitting the right and left channel, not combining them both into a mono signal.

Use the stereo imager for that.

Tokeijikaku 2012-05-06 19:50

Have a combinator at the end before the audio goes to the interface. Inside it, a line mixer. Route the left input channel to channel 1 on the mixer and the right to input 2. Then route the mixer to the output and lower the master volume to 80.

When enabled, the combinator will make the audio mono. Bypass to disable.


All times are GMT +2. The time now is 00:16.