Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   General Forum (read only) (https://www.propellerheads.se/forum/forumdisplay.php?f=3)
-   -   In Ear Mixes via Reason (https://www.propellerheads.se/forum/showthread.php?t=167997)

ljuliano 2012-09-26 21:24

In Ear Mixes via Reason
 
Hey guys.
I have an m-audio profire 610 interface with 8 separate output 1/4 jacks. And I'm looking to have 2 separate mixes for me and for my drummer.
We're using 2 backing tracks, a click track, and my live vocals.
What my initial thought was, was to route each track through a Spyder splitter, then take the split signals and send them into 2 separate 14:2 mixers and then route each mixer to 2 of the outputs on my interface so that both my drummer and I can adjust our mixes separately via each 14:2 mixer. Is this even possible within Reason 6? Thanks a lot.

ljuliano 2012-09-26 22:22

Also, I've ran out of the direct out of audio track 1 into a seperate channel on the 14:2 mixer but if I turn audio track 1 all the way down, then the mixer's volume on that track decreases all the way as well. How do I fix this?

normen 2012-09-26 22:47

For a) just connect the output of one aux send (the "fx sends") you wanna use for one mix to the appropriate output connectors of the hardware interface at the top.
For b) you can set the aux send to pre fader mode so it won't be affected by the fader level :)

faithjunkie 2012-09-26 23:03

are u using reason 6?

ljuliano 2012-09-26 23:03

Ya but it has record with it

ljuliano 2012-09-26 23:04

Dude thanks so much. Been stressing about this all day! lol You're my savior

normen 2012-09-26 23:06

Np, heres some images:
http://i.imgur.com/1jaBG.png
http://i.imgur.com/WPzlS.png
Aux 1 goes to out 3/4 and Aux 2 to 5/6, note that the "pre" button is pressed too.

ljuliano 2012-09-26 23:06

Can you tell me where this aux send pre fader mode is located?

ljuliano 2012-09-26 23:06

ah perfect! disregard my last question! lol

normen 2012-09-26 23:09

You can even listen to that mix by pressing the "fx send" button in the master section and then selecting 1 or 2 to prelisten that. You have to have the "CTRL ROOM OUT" connected to your main outputs instead of the "MASTER OUT" to use that prelistening function :)


All times are GMT +2. The time now is 06:30.