Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   Feature Suggestion Forum (https://www.propellerheads.se/forum/forumdisplay.php?f=7)
-   -   recording of LFO modulated potentiometers (https://www.propellerheads.se/forum/showthread.php?t=171456)

cyclic604b33 2012-11-23 00:01

recording of LFO modulated potentiometers
 
when i assign a LFO to a modulation routing matrix (eg. guitar Amp Wah frequency),
i would like to be able to record the motion to a midi controller lane.

this would be useful to allow a periodic variation of the modulation in a controlled fashion.

it looks like Reason already gives the MIDI control lane precedence over the LFO controller and this makes the data logically flexible, however there needs to be a parameter to resolve the jump cut effect of LFO irregular or invisible data values as they correspond with midi controller lane data (a ghosted graphical representation of the LFO profile ?).

data smoothing value comes to mind where there is a curve applied to the data if it jumps from 25 to 80 or if the difference is greater than 10 midi units (0-127) in 1/8th bar or something using pull down menus ...

normen 2012-11-23 00:06

Hm not really possible afaik but you can convert CV to audio and record that, then convert it back when playing back that channel. Thor allows you to do this and I think some REs as well.

cyclic604b33 2012-11-23 00:09

how do you convert the cv to audio ?

remember :) this is a feature suggestion forum ... so we are praying to the techno arch angels at the gates of new feature heaven ;)

colcifer 2012-11-23 00:11

A lot of that can be done already by using Thor to convert cv to audio, which you can then record into the sequencer. It'd be a PITA to do a complex edit in the sequencer but it's possible. I believe there's also a file by JB that has common oscillator shapes inputted to sequencer automation lanes, though I don't have a link for it. So don't despair; there are viable workarounds.

c

normen 2012-11-23 00:13

Quote:

Originally Posted by cyclic604b33 (Post 1183298)
how do you convert the cv to audio ?

remember :) this is a feature suggestion forum ... so we are praying to the techno arch angels at the gates of new feature heaven ;)

Like I said, Thor can do that, remember the arch angels like if you act according to the holy protocols: http://www.mikeash.com/getting_answers.html ;-p

Use the modulation matrix to set up the conversion:
http://i.imgur.com/XIDGV.png

Then use the outputs/inputs on the back of Thor:
http://i.imgur.com/ugdLF.png


All times are GMT +2. The time now is 08:27.