Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   General Forum (read only) (https://www.propellerheads.se/forum/forumdisplay.php?f=3)
-   -   Tremolo effect? (https://www.propellerheads.se/forum/showthread.php?t=173511)

popart38 2012-12-28 13:30

Tremolo effect?
 
Hi, I need know how can I make Tremolo effect for my line guitar.
Thanks

ayello 2012-12-28 16:44

There some tremolo presets in Pulveriser


Best
Michel

kylelee 2012-12-28 17:31

select the mixer channel for the guitar and then click add an effect.
when the dialog box comes up search the factory sound bank for tremolo or vibrato.

a pulverizer can do tremolo alone but other device could as well. look at the settings and wirings for the searched patches that come up to learn.

razingspiral 2012-12-29 14:09

As above stick a pulveriser in after your line6 amp.

Send some of the follower signal into the tremor and then send some of the tremor signal to the pulveriser gain.

The follower will increase the speed of the tremor for loud (above threshold) sounds and then slow down to the tremor speed. Experiment with the follower threshold, tremor rate and how much signal is sent to the overall volume - these settings will go from a gentle tremor to something pretty mad.

I've not tried this with guitar but I made a nice dynamic sounding trip-hop rhodes from a very ordinary nn-xt patch using this technique. I beleive there is a patch in the soundbank which will get you started.

NB If you don't want the puveriser to colour your sound just turn down the squash and dirt to zero. You might want to init patch/reset device before you start.

popart38 2012-12-29 16:40

Thank you all have been of great help, I am trying everything


All times are GMT +2. The time now is 13:01.