Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   General Forum (read only) (https://www.propellerheads.se/forum/forumdisplay.php?f=3)
-   -   Instruments to tracks (https://www.propellerheads.se/forum/showthread.php?t=175186)

Cp7144 2013-01-27 01:39

Instruments to tracks
 
Created drum patterns and synths using matrix but cannot get them recorded into sequencer tracks.
whats the trick?

SteveDiverse 2013-01-27 01:51

in the sequencer, set the L and R indicators to the range where you want the pattern, then on the matrix, right-click and select 'copy pattern to track'. it will copy the pattern notes to the lane for the instrument that matrix is controlling and it will repeat the pattern as necessary to fill from L to R.

then click on the 'pattern' control in the matrix to turn the matrix off so it doesn't run and double-trigger notes.

MayorMcCheese 2013-01-27 01:52

In R6 top-left, go to Help > Reason Help > Index > Matrix Programming; check out “Converting pattern data to notes in the main sequencer”.

Edit: And what Steve says.


All times are GMT +2. The time now is 23:40.