Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   General Forum (read only) (https://www.propellerheads.se/forum/forumdisplay.php?f=3)
-   -   Control Surface for Reasons 6.5 sliding fader sync/w Axiom Pro (https://www.propellerheads.se/forum/showthread.php?t=175333)

phoenix690 2013-01-30 04:03

Control Surface for Reasons 6.5 sliding fader sync/w Axiom Pro
 
Can anyone refer or suggest a control surface like the Avid control surface mix that can control the faders on the main mixer in Reasons 6.5? I currently use an Axiom Pro as my controller but I have been unable to get the sliding faders to contol the faders of the main mixer in Reasons 6.5. The other programs such as ProTools automatically lock up via hyper control. A keyboardless controller with at least 8 faders would only enhance the Reasons mix down experience. My brain is fried trying to figure out how to get the Axiom faders to sync with the faders on the main mixer in Reasons 6.5.
Is it even possible to do?


Please help.

SteveDiverse 2013-01-30 05:35

On the axiom - try preset 10. also try locking it to the mixer. also try creating a lane in the sequencer for the mixer.

meanwhile, checkout Panorama P4 and P6 controllers and their new P1 control surface just announced at NAMM.

serious integration with reason... www.nektartech.com

CARTERRC 2013-03-18 12:17

Select the Master Section in the Sequencer and then your sliders will work


All times are GMT +2. The time now is 18:06.