Propellerhead Forum

Propellerhead Forum (https://www.propellerheads.se/forum/index.php)
-   General Forum (read only) (https://www.propellerheads.se/forum/forumdisplay.php?f=3)
-   -   Reason 7 @ PH (https://www.propellerheads.se/forum/showthread.php?t=179984)

dacess123 2013-04-05 12:55

Reason 7 @ PH
 
Hi Propellerhead

It's probably too late for this but if it's not done already are you guys planning on putting a couple of extra rotaries on the combinators? With all the different devices/RE's 4 rotaries doesn't really cut it. Another 4 maybe..? I'd even be grateful for 2! :-)

nhsh 2013-04-05 13:23

You might have more joy asking for an RE dev to create a simple 4-knob CV signal remote controller, which plugs into the CV1/2/3/4 on the back of the combinator. They could call it Combover.

dacess123 2013-04-05 15:16

Hey, that's not a bad idea!

enold 2013-04-05 21:15

About the combinator. What about more programming slots

matthammond 2013-04-06 08:03

Like this :D

http://shop.propellerheads.se/product/volt-sl-1/

electrochoc 2013-04-06 17:22

Quote:

Originally Posted by nhsh (Post 1281560)
You might have more joy asking for an RE dev to create a simple 4-knob CV signal remote controller, which plugs into the CV1/2/3/4 on the back of the combinator. They could call it Combover.

Quote:

Originally Posted by matthammond (Post 1282278)

You're right: some Combinator limitations could be overcomed with Volt SL-1, but, for more complex programming, there could not be anything better than more buttons on the Combinator...

I guess Combinator could be extended without affecting its backward compatibility, like Dr. Rex was...

electrochoc 2013-04-06 17:24

I'll add that, with the growing possibilities of making our own synths in Reason (thanks to its modular features), I think Combinator should have way more buttons: 20, 24, more?

Bonkhead 2013-04-06 20:42

32 ... so you can also build a 32 band dynamic EQ

enold 2013-04-06 20:48

I mean not only buttons.. The greatest limitation I feel is that one device can only be programmed in ten slots. What if I want to turn more than ten knobs in a device aat the same time with a combinator knob?
Or five with one knob and five with a second and three with a third and so forth..

Wyggy 2013-04-06 21:01

Quote:

Originally Posted by nhsh (Post 1281560)
You might have more joy asking for an RE dev to create a simple 4-knob CV signal remote controller, which plugs into the CV1/2/3/4 on the back of the combinator. They could call it Combover.

Wouldn't be much use to me. I'm bald. ;) or an RE to produce knobs and buttons at the rate of knots. ;) ;)


All times are GMT +2. The time now is 03:11.