I had the same excellent customer service here was my e-mail and response
On Mon, Aug 13, 2012 at 4:50 PM, wrote:
Hi, I just purchased the loundness meter and I'd just like to ask a question
about metering a reference track. Just to let you know I've watched the
intro video 3 times and am still a bit confused.
Which meter should I be observing to get the same loudness results, should
it be the loudness meter or the total meter?
Thank you for buying the loudness meter. The big display shows the
"total loudness", which is a combination of the two smaller loudness
displays (and not just the maximum of the two), so if the material is
fairly balanced between left and right, then looking at the big
display should be enough. If the reference track and the main track
have different peak levels, use dyn.rng. mode for the big display by
pushing the mode button next to it so that the big display's value is
calculated as if the audio was normalized.
You probably got this already, but when you switch the inputs, the
whole device just starts listening to the selected input and all the
meters show values calculated from the selected input.
I hope this helps with your question. Please let me know if you have