View Single Post
  #20  
Old 2013-01-26, 02:24
jkheal jkheal is offline
 
Join Date: Jul 2008
Posts: 1,576
Quote:
Originally Posted by Bjerre View Post
""UPDATED WORKING SOLUTION FURTHER DOWN""

Lately I've not been able to see deleted files in the Recycle Bin.
With some googling I found out that the CodeMeter USB-stick overlaps the other hdd's and causing major problems. For instance, you won't be able to restore- or see deleted files in your recycle bin folder.

There should be a solution to this but since a new update to Codemeter removed their "tools > Code Meter Disc Configuration" I have no idea how to fix this problem.

Link to older solution:


http://answers.microsoft.com/en-us/w...8-2448f5e2755c


------------------------------------------------------------------------------------------------------------------------------------------
I found this on the web:

I just discovered a working solution!

CodeMeter 4.30 and later
Since CodeMeter Version 4.30, the Disc Configuration tool is no longer available.
But the disk configuration can still be changed by using the cmu32-command line tool:

1.Open your command line console (e.g. Start > Run... and then type cmd)
2.Browse / set the current directory to C:\Program Files\CodeMeter\Runtime\bin
3.Now type the following:

cmu32 -s******** --set-config-disk RemovableDisk

Please replace the ******** with the serial number of your CmStick.
The serial number can be found on the CodeMeter key itself, or open the CodeMeter Control panel for the CmStick’s serial number.

Type Exit to close the command prompt.
Finally unplug and replug the codemeterstick.

To change the setting back, you can use this command line:

cmu32 -s******** --set-config-disk LocalDisk.
----------------------------------------------------------------------------------------------------------------------------------------------------

This solution should work. A problem though is that when you type C:\Program Files in CMD you will get an error message telling you that: 'C:\Program' is not recognized as a internal or external command, operable program or batch file.

If you know the basics on how to Browse with the 'CD' commands, you will be able to find this with no problem. Remember that the cmu32 might be in another folder and the correct directory should be Program Files <x86>
Thanks very much for this!! I got as far as finding that I needed to change the disk type, but was flummoxed to see the tool no longer provided.

EDIT: I must say, I am blushing a bit to be adding a comment to a thread with such a naughty title.
__________________
Jon Heal
---
Reason 7.0.1 • A computer • A few boxes that do something or other • Virtually no talent and/or skill

Ye Olde FishCAM

Last edited by jkheal; 2013-01-26 at 03:12.