View Single Post
  #3  
Old 2013-03-02, 18:20
SCK777's Avatar
SCK777 SCK777 is offline
 
Join Date: Feb 2006
Posts: 35
I think it depends on how you set up your hardware interface. You would need two output pairs to monitor both master fader and control room out and you need to be able to switch between one and the other because like you mentioned listening to both simultaneously is not right. I use the hardware to control monitor level leaving the master fader and control room pot at unity gain. and if I want to say just monitor the reverb return, I switch with the audio interface control panel. Do you mixdown OTB? If not then I guess you don't need to have the master outs connected at all which is probably the deal that you noted in the video. If you rewire and mixdown into another daw just make sure it's recording the signal from master out.