Thread: Almost Perfect.
View Single Post
  #2  
Old 2013-03-27, 01:51
nickmorgan19457's Avatar
nickmorgan19457 nickmorgan19457 is offline
 
Join Date: Jun 2009
Posts: 524
Quote:
Originally Posted by mrjassonturner View Post
1.Add "Record Enable" to the devices on the rack.
2.Bring back "Command"+1or2...and now 3. (2key strokes...I know...I'm too used to it now )
3.Shift should work the same way in the sequencer window as it does in the rack.
4.In the "DYN section" of the mixer channel strip, PLEASE, reset the compressor release sooner than 100ml/sec.
5.Make a device with a multi(4-6-8band)band EQ.
6.Make a device with a multiband compressor
7.Add dB meters to the channels
8.Add min/sec to the sequencer grid(super nit picky request..I know)
(And how could I almost forget this one? Last but certainly not least.)
9.PLEASE PLEASE PLEASE Add faders to the mixer/audio(device) channels on the rack...if you add nothing else.
1) Good
4) I doubt this will happen, seeing as it's modeled after the actual channel strip comp from the SSL 9000.
5) What's wrong with the M-Class?
6) Easily made with the stereo splitter
9) They did with Reason 7

Last edited by nickmorgan19457; 2013-03-27 at 08:06.