Propellerhead Software

Go Back   Propellerhead Forum > General Forum (read only)

 
 
Thread Tools Display Modes
  #1  
Old 2012-09-23, 20:32
Soulspeed's Avatar
Soulspeed Soulspeed is offline
 
Join Date: Jun 2010
Posts: 1,153
Still looking for better Master Template

ok, so my music isnt weak if you care to listen, but i run everything seperately as far as EQ and using my Izotope RE maximizer....but i hear people saying "run it thru the master bus to maximize at the end".....whats the difference .... latency?....sometimes it may seem so, but i cant figure out how to run my Izotope Maximizer over the whole project....im right clicking down on the Master Volume Meter on the mixerboard and it will insert it, but nothing comes of it.....no boosting my "whole" track...so i do it all seperately....maybe Matias will answer ...

http://soundcloud.com/soulspeed/bulletshit
  #2  
Old 2012-09-23, 20:57
Dave909's Avatar
Dave909 Dave909 is online now
 
Join Date: Dec 2001
Posts: 3,411
You need to load it up in the master insert section of the mixer. It's the same as for the individual tracks it just works on your main out as in being the last step in the chain. Latency wouldn't be a problem as mixing with mastering on is a pretty bad idea
__________________
Check out Dave909
  #3  
Old 2012-09-23, 21:03
Soulspeed's Avatar
Soulspeed Soulspeed is offline
 
Join Date: Jun 2010
Posts: 1,153
Thanks Dave, i will try this....
  #4  
Old 2012-09-23, 21:06
Soulspeed's Avatar
Soulspeed Soulspeed is offline
 
Join Date: Jun 2010
Posts: 1,153
oh shit YES...this WORKS...thanks alot brother
  #5  
Old 2012-09-23, 21:19
Dave909's Avatar
Dave909 Dave909 is online now
 
Join Date: Dec 2001
Posts: 3,411
You're welcome man! Succes with it
__________________
Check out Dave909
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Selig's Mix-Master Default Template! selig Phead User Forum (read only) 94 2013-06-07 03:01
Still looking for better Master Template Soulspeed Music Forum (read only) 0 2012-09-23 19:45
How you benefit from Selig's Mix- Master Default Template helver Phead User Forum (read only) 4 2012-06-26 23:51
eq before or after compression? (also what's on your master) papercrane Phead User Forum (read only) 18 2011-07-21 00:24
Sharing My Default Template. :) EpicDesign Phead User Forum (read only) 10 2010-10-09 02:31


All times are GMT +2. The time now is 06:29.