Propellerhead Software
  #1  
Old 2012-11-16, 21:04
wellman wellman is offline
 
Join Date: May 2009
Posts: 49
Hot Mix

Imagine you have worked for some hours in a mix and now you kinda like it! But when you check the meter, you see the mix is picking on -2, -1 and sometimes in 0 db. How would you solve this in Reason's main mixer? Since you cannot turn down the volume of more than one instrument at a time, would you try to turn the volume down one by one?
  #2  
Old 2012-11-16, 21:26
koma7's Avatar
koma7 koma7 is offline
 
Join Date: May 2012
Posts: 1,212
Turn down the master or put a limiter/compressor on the master channel. It depends, if you like the mix then really it shouldn't matter if any tracks are peaking there, just make sure the master isn't peaking too much.
__________________
██ Electro-acousmatic organiser of sound. # |[ Eigengrau ]|
██ Post-industrial destroyer of form. # |[ Yin Yang Vikings ]|
██ Other Links # |[ Blog ]| # |[ Facebook ]| #
  #3  
Old 2012-11-17, 00:32
Benedict's Avatar
Benedict Benedict is offline
 
Join Date: Jun 2002
Posts: 2,924
Seeing as your peaks are minor I concur in either lowering Master Fader a tad or probably far better to pop a M-Class Maximising Limiter in the Master Insert and either turn on the 4ms Lookahead or the Soft Clipping.

This will lop those few straight db off the top without any (particularly) noticeable changes to the sound of the mix.

__________________
Benedict Roff-Marsh
- - - - - - - - - -
Music: Bandcamp
ReFills: OSC + Filter - Super Mono-Synth
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT +2. The time now is 16:05.