Propellerhead Software

Go Back   Propellerhead Forum > Feature Suggestion Forum

 
 
Thread Tools Display Modes
  #1  
Old 2012-11-23, 00:01
cyclic604b33's Avatar
cyclic604b33 cyclic604b33 is offline
 
Join Date: Oct 2007
Posts: 510
Lightbulb recording of LFO modulated potentiometers

when i assign a LFO to a modulation routing matrix (eg. guitar Amp Wah frequency),
i would like to be able to record the motion to a midi controller lane.

this would be useful to allow a periodic variation of the modulation in a controlled fashion.

it looks like Reason already gives the MIDI control lane precedence over the LFO controller and this makes the data logically flexible, however there needs to be a parameter to resolve the jump cut effect of LFO irregular or invisible data values as they correspond with midi controller lane data (a ghosted graphical representation of the LFO profile ?).

data smoothing value comes to mind where there is a curve applied to the data if it jumps from 25 to 80 or if the difference is greater than 10 midi units (0-127) in 1/8th bar or something using pull down menus ...
  #2  
Old 2012-11-23, 00:06
normen's Avatar
normen normen is offline
 
Join Date: Sep 2006
Posts: 3,469
Hm not really possible afaik but you can convert CV to audio and record that, then convert it back when playing back that channel. Thor allows you to do this and I think some REs as well.
__________________
Plugin latency issues? Phasing on parallel channels? Want to know the real latency of your audio interface? Try the VMG-01!
Professional Audio Engineer at Theater Bremen, Germany • Part Time Programmer
  #3  
Old 2012-11-23, 00:09
cyclic604b33's Avatar
cyclic604b33 cyclic604b33 is offline
 
Join Date: Oct 2007
Posts: 510
how do you convert the cv to audio ?

remember this is a feature suggestion forum ... so we are praying to the techno arch angels at the gates of new feature heaven
  #4  
Old 2012-11-23, 00:13
normen's Avatar
normen normen is offline
 
Join Date: Sep 2006
Posts: 3,469
Quote:
Originally Posted by cyclic604b33 View Post
how do you convert the cv to audio ?

remember this is a feature suggestion forum ... so we are praying to the techno arch angels at the gates of new feature heaven
Like I said, Thor can do that, remember the arch angels like if you act according to the holy protocols: http://www.mikeash.com/getting_answers.html ;-p

Use the modulation matrix to set up the conversion:


Then use the outputs/inputs on the back of Thor:
__________________
Plugin latency issues? Phasing on parallel channels? Want to know the real latency of your audio interface? Try the VMG-01!
Professional Audio Engineer at Theater Bremen, Germany • Part Time Programmer
  #5  
Old 2012-11-23, 00:11
colcifer's Avatar
colcifer colcifer is online now
 
Join Date: Jan 2010
Posts: 1,526
A lot of that can be done already by using Thor to convert cv to audio, which you can then record into the sequencer. It'd be a PITA to do a complex edit in the sequencer but it's possible. I believe there's also a file by JB that has common oscillator shapes inputted to sequencer automation lanes, though I don't have a link for it. So don't despair; there are viable workarounds.

c
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
recording compensation not work! limbophonic Phead User Forum (read only) 17 2010-02-05 15:53
Shortcut for restarting recording ohrobot General Forum (read only) 8 2009-12-05 01:02
Problem recording via Reason/Rwire to Cubase stensrbr Phead User Forum (read only) 3 2005-12-20 17:04


All times are GMT +2. The time now is 05:31.