Propellerhead Software
  #1  
Old 2012-12-16, 22:30
cyclic604b33's Avatar
cyclic604b33 cyclic604b33 is offline
 
Join Date: Oct 2007
Posts: 510
Lightbulb CV through on all devices

it seems like ive mentioned this a few times but it would be so very nice if they put two extra cv ports on each synth device

cv gate through
cv note (pitch) through

this way we could take midi data dumped from the matrix pattern sequencer or played .. what have you .. after applying a groove template to it we can run it through the nice cv tools that are becoming available shaping the data .. conforming it to a tuner preset, getting a harmony.

if they simply added the ability to place note data onto the spider cv merger / splitter as a lane data then let the notes and triggers come out the splitter this would be good enough.
  #2  
Old 2012-12-16, 22:42
Dave909's Avatar
Dave909 Dave909 is online now
 
Join Date: Dec 2001
Posts: 3,411
As a device can have lot's of CV signals coming in, which one would you put thru? A sum or a specific one? Wouldn't it be easier to clone the signal before it enters a device?

Note CV thru could be useful in certain situations tho
__________________
Check out Dave909
  #3  
Old 2012-12-16, 23:58
cyclic604b33's Avatar
cyclic604b33 cyclic604b33 is offline
 
Join Date: Oct 2007
Posts: 510
Lightbulb

cv gate through
cv note (pitch) through

these two specifically

there needs to be a through beside each in the top left of this image

http://www.reason101.net/wp-content/...v-switcher.jpg
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
differences between FX devices, and the use of all-in-one devices HBovens Phead User Forum (read only) 2 2012-06-21 15:56


All times are GMT +2. The time now is 23:00.