Propellerhead Software
  #1  
Old 2006-06-22, 01:52
dioxide's Avatar
dioxide dioxide is offline
 
Join Date: Jan 2003
Posts: 3,290
Value layering for Combi knobs

In the same way that the NNXT can have three samples on the same key that trigger in different velocity ranges, I would like to be able to use the combi knobs to control several devices but within certain ranges.

ie. On the NNXT velocity 0-57 triggers SampleA.wav, velocity 57-100 triggers SampleB.wav and velocity 101-127 triggers SampleC.wav

On the Combi it would be:

Combi Rotary Value 0-63 = Device A Freq is -63 to 0
Combi Rotary Value 64-127 =
Device B Freq is 0 to +64.

I'm trying to build a DJ mixer EQ at the minute (-20db to +12db) and this would mean I can retain the alt-click auto reset at 0db.

This would also make building crossfades simpler:

ie: Combi Rotary set to control mixer ch1 level:
Combi Rotary Value 0-50 = Ch1 Level is 100
Combi Rotary Value 51-70 = Ch1 Level decreases from 100 to 0
Combi Rotary Value 71-127 = Ch1 Level is 0

I hope this makes sense : )
  #2  
Old 2006-06-22, 02:06
dioxide's Avatar
dioxide dioxide is offline
 
Join Date: Jan 2003
Posts: 3,290
Or maybe...

Just the addition of a Midpoint in the Combi programmer:

ie. Rotary 1 Controls Low Shelf Gain
Min is -64, Midpoint is 0, Max is +32
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT +2. The time now is 01:47.