Propellerhead Software

Go Back   Propellerhead Forum > Feature Suggestion Forum

 
 
Thread Tools Display Modes
  #1  
Old 2012-10-08, 05:28
sleeper0013 sleeper0013 is offline
 
Join Date: Feb 2011
Posts: 79
For the third time kong outputs are screwed

Some of that pads are still sending a signal to the master channel after being reassigned to the expanded outputs. 7 and 12 and 14 wont disengage the signal to master when they are reassigned.

come on guys, this is an easy fix, and an alarmingly necessary one at that.

Last edited by sleeper0013; 2012-10-08 at 05:29. Reason: spelling
  #2  
Old 2012-10-08, 05:44
clip's Avatar
clip clip is offline
 
Join Date: Dec 2001
Posts: 1,425
Quote:
Originally Posted by sleeper0013 View Post
Some of that pads are still sending a signal to the master channel after being reassigned to the expanded outputs. 7 and 12 and 14 wont disengage the signal to master when they are reassigned.

come on guys, this is an easy fix, and an alarmingly necessary one at that.
Works fine for me.
  #3  
Old 2012-10-08, 05:58
sleeper0013 sleeper0013 is offline
 
Join Date: Feb 2011
Posts: 79
well i cant isolate these channels on the expanded outputs. this might just be a win7, 64bit
thing.
  #4  
Old 2012-10-08, 08:30
ProfessaKaos's Avatar
ProfessaKaos ProfessaKaos is offline
 
Join Date: May 2009
Posts: 1,480
Your probably sending signal to the BUS FX section of Kong which outputs through outputs 1-2.
Check each pad to make sure all the SEND : BUS FX knobs are turned to 0. Or if you want to keep using the BUS FX then assign all pads to outputs other then 1-2 so 1-2 is just the BUS FX (plus MASTER FX) signal, then you can use the SSL Channel's Fader and FX to further control the BUS FX.
  #5  
Old 2012-10-09, 22:16
sleeper0013 sleeper0013 is offline
 
Join Date: Feb 2011
Posts: 79
Thanks Kaos, that cleared thing up.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kong: 16 mono outputs, your thoughts? onepixel Phead User Forum (read only) 7 2010-09-11 23:33
Meter Changes jmatos General Forum (read only) 10 2009-12-16 06:58
From Korg's web site observer=energy WhiteMatter General Forum (read only) 3 2008-05-06 13:49
Reason 3.0 is not following Time Signature changes from SL3 dyoungs Phead User Forum (read only) 12 2006-01-10 11:30


All times are GMT +2. The time now is 14:31.