Propellerhead Software
Prev Previous Post   Next Post Next
Old 2012-12-05, 07:38
Lovechild Lovechild is offline
Join Date: Jan 2001
Posts: 10
Kong could be better

I was hoping to change to reason and make use of Kong as an MPC type device but it falls short in a few areas.
If you're layering drums you need to be able to tune each layer so they all sit together. The envelope is a bit lacking as well. Look at other MPC style boxes, They have ADHSRs or similar while Kong only has ARs. The interface for the nano is so small. I wouldn't like to have to program big multi drum patches for that with velocity zones etc. Making one of those would take ages compared to other MPCs. You can't easily swap pads around. As good as all the modelling stuff is, if you dont have a decent full featured sampler underneath your pads it's not as cool as the competition out there

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
setting up a kong combi - with aux sends modecai Phead User Forum (read only) 0 2012-07-17 16:23
Kong Stinks and Here's Why Geneyus6 Phead User Forum (read only) 33 2012-06-02 17:10
Kong Stinks and Here's Why Geneyus6 General Forum (read only) 84 2012-05-25 19:06

All times are GMT +2. The time now is 06:09.