Propellerhead Software
Old 2012-12-06, 08:19
karnaman karnaman is offline
Join Date: Nov 2012
Posts: 1
Reason and GR-55

Hi all,
I'm a newbie to Reason and having a problem recording guitar through a Roland GR-55 guitar synth connected via USB to an Intel Mac running 10.7. In Reason I can see the input levels from the guitar synth, so I know the signal is getting in there fine. The issue is: To get Reason to see the guitar synth signal, I have to select the GR-55 as my audio device in the audio preferences. However, doing this sets the GR-55 as my audio output device as well, which I'd like not to do. I'd like to just sound to be output out of the built in output which is attached to speakers. The Active Input Channels and Active Output Channels both show 2 of 2 but the Channels buttons are greyed out. I can't imagine that there is no way to accomplish this. Please help.Thanks!

Attached Images
File Type: jpg Screen Shot 2012-12-05 at 11.18.21 PM.jpg (16.0 KB, 5 views)
Old 2012-12-06, 11:37
jengstrom jengstrom is offline
Join Date: Jan 2005
Posts: 931
If you want to record audio directly from the USB audio device of the GR-55, it must be selected as the current audio interface in Reason Preferences.

Reason does not allow multiple audio drivers at the same time because the science of digital audio clocking means most combinations of audio interfaces malfunction if not properly clock synced.

If you want to be sure you are recording a intact audio stream, I suggest routing the analog monitoring signal out from the GR-55 into your listening equipment while recording from the GR-55.

You can try how well your combination of Mac built in output and GR-55 input will work, by setting up a Aggregate Device using Mac OS X.

The GR-55 probably uses an internal clock, since it can operate without a computer.

Theoretically, if the Mac built-in audio interface is clocked by its Mac OS X driver and not a crystal oscillator, it could be driven by clock recovered from the GR-55 and the two interfaces would work in sync. However this would require the Aggregate Device driver to recover the clock from the GR-55 and use that clock to sync the driver for the built-in audio interface. I doubt that Mac OS X Aggregate Devices can pull that off.

Edit for completeness: In any case, the Mac OS X Aggregate Device driver can artificially sync any two interfaces, but unless they can truly share a single clock, the result is destructively modified audio. In some cases, such destruction is not audible, but is always unavoidable.

Last edited by jengstrom; 2012-12-06 at 12:20.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Popular Plugins as Combinator Patches NoelGMusic Phead User Forum (read only) 216 2013-09-25 02:12
Why did i buy record?????!!!!!*$ Mathmatech General Forum (read only) 131 2013-01-14 17:02
People just face it; Reason rules again! :) [n/t] eric General Forum (read only) 26 2011-08-02 01:49
How do I solve that factory sound bank thingie? vectro Phead User Forum (read only) 6 2009-05-19 20:11
Musikmesse - any news from the propellerhead booth? -nt electrofux General Forum (read only) 22 2007-03-31 18:25

All times are GMT +2. The time now is 10:53.