Propellerhead Software

Go Back   Propellerhead Forum > Feature Suggestion Forum

 
 
Thread Tools Display Modes
  #1  
Old 2012-12-15, 23:05
Vollstadt's Avatar
Vollstadt Vollstadt is offline
 
Join Date: Jun 2002
Posts: 54
Mix Channel Level Meter as Spectrum Analyzer

Why not use the mix channel level meter as a spectrum analyzer? Imagine that the LED's in the level meter represents 20hz at the bottom and 20kHz at the top. The intensity (brightness) of the led represents the strength of that frequency from low to high. For example, a hi hat would light up the top of the level meter, a kick would light up the bottom. The higher the level of that frequency, the brighter the LED. Basically they would 'pulse'.

One could have a button underneath the master out level meter that throws the mix channels into spectrum analyzer mode.

This would give you a nice overview of the strengths of frequencies in your track and let you look at them side by side.

(This would be the equivalent of using the BV-512 in EQ mode, but the output of each frequency would not be a level but would be intensity or brightness of one light in the level meter)
__________________
http://www.ewireasonsounds.com - Use your wind controller with Reason!
  #2  
Old 2012-12-15, 23:19
lunastationnadj's Avatar
lunastationnadj lunastationnadj is offline
 
Join Date: Oct 2009
Posts: 159
I'm guessing it would be pretty difficult to perceive enough difference in brightness for the information displayed to be of any use, and without enough LEDs to give enough resolution across the spectrum.

Not a terrible idea, but I don't think it would be of a lot of use to the people asking for a spectrum analyser.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Flower Audio - EXCELLENT customer service! (and tips on using the Loudness Meter) Pat303 General Forum (read only) 1 2012-08-14 13:57
spectrum analyzer Ryackley Phead User Forum (read only) 8 2010-04-10 05:33
Mixer channel meter levels deanr Phead User Forum (read only) 3 2004-11-12 11:35
Mixer channel is has a signal on the Meter, but no sound reincarnationfish General Forum (read only) 2 2004-11-07 21:43


All times are GMT +2. The time now is 18:10.