Propellerhead Software

Go Back   Propellerhead Forum > General Forum (read only)

 
 
Thread Tools Display Modes
  #1  
Old 2012-12-17, 00:54
parachutes parachutes is offline
 
Join Date: Dec 2011
Posts: 35
Where did the parameter automation box go in 6.5? or am i just stupid?

I used to be able to right click on a track and have a big box with a ton of parameter options come up, and i could pick what i wanted to automate. now i see no option. where did it go?
  #2  
Old 2012-12-17, 01:17
electrofux electrofux is offline
 
Join Date: Jan 2000
Posts: 860
it is still there. Are you using the NNXT or the PX7? Those have only a few automatable parameters.
  #3  
Old 2012-12-18, 02:37
NetFink's Avatar
NetFink NetFink is offline
 
Join Date: Mar 2012
Posts: 41
I think what you are looking for has changed in 6.5 and its a little easier.

In your Track list in the Sequencer window look just above the Block automation track.

You'll see "Lanes" "+" and a button that looks like a funny square wave.. if you mouse over it for a second it will show "Track parameter automation" depending on the track you currently have selected clicking this will bring up the parameter options list for that device. You can select the parameters from that list like before depending what can be automated for that device. Also you can get the parameter you want by going to the device in the rack or mixer and right click on the knob/button/fader etc. and choose "Edit Automation" from the context menu.. and that specific parameter track will be created. I hope this helped. And what you were looking for.
__________________
AKA the OldschoolSkunk

RE's Buffre , Antidote, PredatorRE ,Saturation Knob,Korg Polysix,Polar,Pulsar Dual LFO,Radical Piano,Radical Keys,SubBoomBassRE,Glitch,BitSpeek,ReQ131,ReVolt,
Morphin XF,CV Suite Line Processor
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiple Parameter Automation elusiveshadow General Forum (read only) 5 2012-10-14 22:56
record enable parameter automation SonarScope Phead User Forum (read only) 5 2010-10-21 20:17


All times are GMT +2. The time now is 15:35.