Propellerhead Software
Prev Previous Post   Next Post Next
Old 2013-01-02, 00:31
selig's Avatar
selig selig is offline
Join Date: Jun 2003
Posts: 10,512
Originally Posted by dioxide View Post
I second this suggestion, it should be built into the mixer.
I would add that this, that if this feature IS added it should be on the Control Room output ONLY. No physical mixer has a mono switch on the main outputs, only on the MONITOR outputs. Putting it on the main outputs (or using a Combinator) can result in the potential for accidentally exporting mixes in mono. Putting it on the monitor path (like physical consoles) ensures this can never happen, and that's exactly why this feature is implemented that way.

PLUS, monitoring in mono is best done on a single monitor, so you also need a way to cut one of the two stereo speakers when using mono mode (also common on physical consoles). :-)
Giles Reaves, aka 'selig'
Audio Illusionist, Musical Technologist
Selig Audio, LLC

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
mixing in mono LastAlternative Phead User Forum (read only) 7 2012-11-16 13:43
Mono Mix button in R+R Djstarski Phead User Forum (read only) 13 2011-11-18 09:21

All times are GMT +2. The time now is 13:49.