Propellerhead Software

Go Back   Propellerhead Forum > General Forum (read only)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 2013-01-08, 17:37
Zardoz70 Zardoz70 is offline
 
Join Date: Mar 2011
Posts: 79
Quote:
Originally Posted by OMOMs View Post
Reason has quite the easy sample rate conversion.
you can change sample rate while your song is playing, without a hitch!
I did not understand what you were asking about originally, but I'd say with Reason samplerates are not an issue (at least in my experience). So if you do sampling, you'll want the highest samplerate, because it allows the most accurate changes with the least destruction of the sound. In other words a sound that is sampled 96000 times a second is displayed way more accurately than at 44.100 times a second. So if you do any pitching or stretching, the higher samplerates will help the accuracy of the sound.

btw. as far as I understand it is impossible to have different samplerates in Reason at the same time, as it converts everything to session rate on import automatically, plus it always uses the highest bit depth available from your interface.

Are you sure? For example I can load an nnxt factory sound bank patch which says on the nnxt display that they are 16 bit 44.1 khz and then I can load another nnxt which says my samples are 24 bit 48 khz....? Are they still converting anyways or something? That was my main issue, I havve a bunch of samples, some with different bit depths and sample rates and I am wondering if there are dangers in using them within one reason project.....
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT +2. The time now is 13:13.