Propellerhead Software

Go Back   Propellerhead Forum > General Forum (read only)

 
 
Thread Tools Display Modes
  #1  
Old 2013-05-28, 02:01
joeyluck's Avatar
joeyluck joeyluck is online now
 
Join Date: Mar 2011
Posts: 3,534
OT: Shure Beta 57A vs. 58A; switching grilles

The SM57 is probably my favorite microphone as an engineer and musician. It is great on instruments and vocals. It's like the "swiss army knife" of microphones.

Today, I purchased online a Beta 57A (taking advantage of the current mail-in rebate offer from Shure). I haven't had the opportunity to use the Beta 57A in the past (I have used the SM57 plenty and the Beta 58A)... I'm sure I'll really like it.

I noticed in the FAQ section on the Shure site that the main different between the two (57A and 58A) is the grille: http://shure.custhelp.com/app/answer.../kw/beta%2057a

So then I'm wondering... Would it be possible to simply purchase a 58A grille and use it on the 57A for a 58A similar result? In most cases, I do prefer the sound of the 57 over the 58. But if I can simply switch out a grille if I come across a vocalist that sounds better on a 58; then that would save money from buying a whole other microphone.

Here you can see a slight difference in sensitivity (at 1kHz open circuit voltage):
http://cdn.shure.com/brochure/upload...c_brochure.pdf
Beta 58A: -51.5 dBV/Pa (2.7 mV)
Beta 57A: -51 dBV/Pa (2.8 mV)
Everything else is the same, except for the weight which may also be attributed to the difference in grilles.

Make sense what I'm asking? I've tried Google and youtube searches for replacing the grille and haven't had any results... Anybody have any experience with this?

Thanks =)
  #2  
Old 2013-05-28, 07:12
joeyluck's Avatar
joeyluck joeyluck is online now
 
Join Date: Mar 2011
Posts: 3,534
Response from Shure

I wasn't expecting a response from Shure so quickly (or at this hour).

So, I had sent an email to Shure as well, but was under the impression I would get a response somewhat like, "We cannot comment or advise you to do so." However, I did not get that response.

In case anyone else was curious, the answer to my question is "Yes."

With the Beta 57A and 58A, the grilles are interchangeable and changing grilles achieves the result of the other. Good to know! =)

Looks like in the future I will just buy a handful of Beta 57A's and a couple 58A grilles for those just-in-case situations.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT +2. The time now is 07:09.