Propellerhead Software
  #1  
Old 2011-03-10, 23:24
jkheal jkheal is offline
 
Join Date: Jul 2008
Posts: 1,576
Record System Requirements

Okay, now that I have maxed out my RAM, I think can say two things with much confidence:
  1. The published System Requirements for Record will not get you very far.
  2. "Multiple core highly recommended." Translation: This application was optimized for multiple cores and simply will not perform well on with a single core processor.

The pertinent published system requirements:
  • Intel P4 / AMD Athlon XP at 2GHz or better (multiple cores highly recommended)
  • 1 GB RAM or more
  • 2 GB free hard disk space (program may use up to 20 GB scratch disk space)
  • Windows XP (SP2)*, Vista or Windows 7
  • Audio Interface with ASIO driver
My system is a 3.00GHz P4 w/XP SP3 and an M-Audio Audiophile 2496 sound card. Previously, I was running with 1GB of RAM. With that amount of RAM, even Reason with just a few devices loaded would generate pops, clicks and occasional stutters. Record was essentially unusable. It would take forever to load and the Baguettes demo sond would play about 10 seconds and then crap out.

So I took a chance and maxed out the RAM to 4GB. I did not add the 3GB switch to the boot ini file as the onoard video is sharing RAM, so really I have about 3.26GB available and I figured I might get reduced kernel performance if I added the 3GB switch.

Anyway, the computer naturally works a lot better in general now with the extra RAM. There was a very noticeable reduction in paging to disk. Reason also performs better; no more pops or clicks with my limited testing since upgrading the RAM. Record now loads faster, but it still can't play the demo Baguettes song worth a darn.

So I would say for Record, multiple cores appears to be even more important than lots of RAM. I have a decent amount of RAM now and my processor is spec’ed 50% faster than the recommended minimum. Clearly, Record is optimized for multiple cores.

Last edited by jkheal; 2011-03-11 at 16:08.
  #2  
Old 2011-05-14, 23:46
VanKujo VanKujo is offline
 
Join Date: Nov 2005
Posts: 1
Your statement- "M-Audio Audiophile 2496"

Under the card's hardware settings (start/settings/controlpanel/m-audio)
Hardware tab - what are the sample settings? Try 44100 sample rate, AND ASIO/WDM buffer size of 256 samples.

Then try WDM instead of ASIO to clear up the pop / sputter /dropouts.

If that does not work, lower the sample rate in steps until the problem is corrected. 32 24 22 16...
You should shut down and restart reason/record between each change in setting to be safe the change is updated.

Larger buffer size creates latency. 5 ms is all I can take.

You can also try dedicating your computer to only music. THEN ASIO becomes an option possibly.

Detach from internet. Pull the plug out.
http://www.wikihow.com/Prepare-Your-...-Music-at-Home

http://www.cakewalk.com/support/kb/r...spx/2007013101

How many microphones will you record from at once?

I would like 12. I have 2. 2 xlr connections or 4 or 8 are on the hardware sheet above. I use M-Audio 8 ins (6 rca / 2 xlr) @ 100 $Usd
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Record 1.5 problem - can't authorize! Pat303 General Forum (read only) 21 2011-04-21 10:42
Athlon XP 2500+ System and Record tonyafx General Forum (read only) 0 2011-02-24 05:57
Using Pro Tools With Record - System Overload!?! JMRobins Phead User Forum (read only) 1 2011-02-04 18:43
Record system requirements (please reply) Morkulv General Forum (read only) 14 2010-05-22 11:14


All times are GMT +2. The time now is 17:14.