Propellerhead Software
Prev Previous Post   Next Post Next
  #1  
Old 2012-09-06, 20:48
cloudharbormusic cloudharbormusic is offline
 
Join Date: Oct 2011
Posts: 11
Pesky Ground Loop (Need some advice!)

I've got a ground loop problem. Here's my setup: I have a home built desktop computer connected to the balance interface. Balance is then connected to two KRK rokit 6's via the headphone out and an unbalanced RCA to 1/8th inch cable with a trs adaptor at the end. I realize this may be the problem, but the confusing thing is that when I connect my laptop to balance with the same cable set up, the ground loop disappears. I also have two Asus monitors connected too. All of the power for the monitors, desktop, and speakers all go to a single power strip that I have connected to a normal power outlet.

If I used balanced cables (XLR to TRS), will this fix the problem? If not, Will I have to use unbalanced cables and run the monitors through a Ground Loop Isolator?
Thanks in advance for help, I'm quite frustrated, so any advice is helpful

Last edited by cloudharbormusic; 2012-09-06 at 22:06.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ground loop 0miky Phead User Forum (read only) 17 2012-02-16 00:05
NN-19 or Audio Track, which is more CPU efficient? zombie Phead User Forum (read only) 72 2010-09-20 19:34
Ground loop/Earth loop Modwheel General Forum (read only) 7 2009-12-15 01:52
Export audio loop points - Reason 3.0? rpieket Phead User Forum (read only) 2 2004-03-28 05:39


All times are GMT +2. The time now is 10:35.