Propellerhead Software

Go Back   Propellerhead Forum > General Forum (read only)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 2013-07-06, 19:26
xbitz's Avatar
xbitz xbitz is offline
Join Date: Feb 2013
Posts: 414
Arrow macprovideo : Studio Concepts 501 Gear and the Physics of Sound

Studio Concepts

These days more and more people are recording at home instead of going to professional studios. The technology involved has become so accessible that almost anyone can start up their own studio. While this means that there's more music out there than ever, it also means there's a lot more poorly produced music floating around. It's not enough to simply have the required equipment. You need to know how to use it!

The purpose of this course is to help you get a solid grounding in audio engineering and sound recording. You will learn the fundamentals of sound engineering that are crucial to your success in the studio. Understanding the physics of sound and how to properly use things like compression will make all the difference in your recordings.
In this course, Jim Pavett will give you a detailed overview on every aspect of the recording process, with hands on projects covering how to set up your monitors, how to handle phase issues, and how to properly place microphones. Although there is some theory involved everything is well explained, complete with hundreds of helpful visuals. Jim will take you through a complete journey of the fundamentals of audio recording.

Throughout the course, Jim also gives opportunities for you to get out of your seat and get involved. Whether it's figuring out which frequency your hearing tops out at, or moving around the room to figure out the best place to put your monitors, there are tons of practical lessons to try out on your own. If you're starting to put together a studio and are feeling overwhelmed with everything around you, let us help you out by teaching you the fundamentals of audio so you'll never feel like an alien in your own studio again.

1. Introduction(02:27)
2. Sound Wave(02:05)
3. Phase(11:15)
4. Things to Do: Phase"" (01:29)
5. Frequency""(02:38)
6. Frequency Responce(02:00)
7. Sensitivity(01:40)
8. Sound in it’s Environment(05:17)
9. Reality Check: Sound in it’s E…(01:21)
10. Things To Do: Sound in it’s En…(01:18)
11. The Model of a Recording System(02:47)
12. Reality Check – The Model of a…(00:30)
13. Electronic Theory Basics(01:02)
14. Ohm’s Law""(01:45)
15. Circuit Example 1(01:19)
16. Circuit Example 2(01:18)
17. Circuit Example 3(01:21)
18. Reality Check: Electronic Theory…(02:23)
19. Things to Do: Electronic Theory …(01:12)
20. Decibels and Meters(04:00)
21. Headroom(01:42)
22. Dynamic Range(01:54)
23. Frequency Response(01:57)
24. Reality Check: Frequency Respons…(00:57)
25. Specifications(03:26)
26. Knowing Your Equipment(03:28)
27. Components of a Console/Equipmen…(11:34)
28. Things To Do: Signal Routing(03:46)
29. Digital Console(01:53)
30. Compressor / Limiters(05:32)
31. Reality Check: Compressor / Limi…(01:05)
32. Things To Do: Compressor / Limit…(01:11)
33. Expansion / Gate(05:13)
34. Things To Do: Expansion / Gate(01:52)
35. Delay(01:09)
36. Things To Do: Delay(01:39)
37. Flange(01:20)
38. Phase(00:40)
39. Chorus(00:43)
40. Reverb(06:15)
41. Things To Do: Reverb(01:21)
42. Equalizer(04:04)
43. Things To Do: Equalizer (00:46)
44. Studio Monitors(08:07)
45. Microphones (01:12)
46. Dynamic (00:47)
47. Condenser (01:05)
48. Ribbon(01:17)
49. Tube(01:07)
50. Microphone: Transient Response(01:25)
51. Microphone: Patterns(01:30)
52. Cardioid(01:54)
53. Omni(00:39)
54. Bi-directional(00:49)
55. Microphone Impedance and Options(02:30)
56. Microphone Placement(02:57)
57. Microphone Placement: Acoustic I…(03:04)
58. Microphone Placement: Electric G…(02:26)
59. Microphone Placement: Vocals(01:12)
60. Microphone Placement: Drums(01:20)
61. Things To Do: Microphone Placeme…(02:24)
62. Electronic Impedance and Levels(02:40)
63. Things To Do: Electronic Impedan…(01:54)
64. Cabling and Connectors(05:17)
65. MIDI(01:53)
66. AES/EBU(00:51)
67. S/PDIF(00:33)
68. Toslink(00:22)
69. ADAT(00:31)
70. TDIF(00:23)
71. MADI(00:23)
72. BNC(00:19)
73. SMPTE(00:54)
74. MTC(00:19)
75. USB(00:25)
76. FireWire 1394(00:39)
77. Solder Technique(06:12)
78. Reality Check: Solder Technique(01:24)
79. Patch Bays(01:30)
80. Connection and Configuration(03:30)
81. Reality Check: Patch Bays(01:08)
82. Things To Do: Patch Bays(01:52)
83. Introduction to Digital Audio Th…(01:30)
84. Definition of Digital Audio(01:08)
85. A/D Conversion(06:14)
86. Reality Check: Digital Audio The…(01:04)
87. Clocking Setups(02:15)
88. Computer Interfaces(02:40)
89. Computers(04:42)
90. Installing Computer Interfaces(01:17)
91. Creating Your Own Studio(02:22)
92. Putting It All Together(01:11)


I've found it accidentally (missclick ) but it was quite interesting (some of the topic in it was totally unknown for me), so I mention it, maybe somebody doesn't know about it
A mix is finished when you meet the deadline....Dave Pensado says...

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT +2. The time now is 18:11.