Propellerhead Software
Prev Previous Post   Next Post Next
  #1  
Old 2003-07-01, 02:05
dawelo1958's Avatar
dawelo1958 dawelo1958 is offline
 
Join Date: Oct 2002
Posts: 577
Edirol Memory Sets and Reason

This is the info from the manual:


Press the [EDIT] button. The display will indicate "EDT" (EDIT).
Press the [BULK] key. The display will blink "BLR" (Bulk Receive).
Confirm what's indicated and press the [ENTER] button. The display will indicate "RS", and the "S" will blink.
Use the [DEC] [INC] buttons or the [0] [1] keys to select the mode.
Confirm what's indicated and press the [ENTER] button. The third digit of the display will blink, and the PCR-30/50 will wait to receive bulk data.
Transmit bulk data from your sequencer or other device. Specify PCR (Macintosh: PCR1) as the MIDI output device for your sequencer software. For details on this setting, refer to the manual of your sequencer software. For details on the port that will be used to transfer bulk data, refer to "Specifying the port" (page 141).
When the PCR finishes receiving the bulk data, the display will indicate "END."
Confirm what's indicated and press the [ENTER] button.

I can't find any information about specifying the MIDI output in Reason. Reason doesn't 'have' MIDI out does it? Is this a Rewire issue? Do I need an external sequencer such as Sonar?
Thx for your help.


 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT +2. The time now is 08:09.