Propellerhead Software
Prev Previous Post   Next Post Next
  #1  
Old 2013-05-31, 12:54
emersound's Avatar
emersound emersound is offline
 
Join Date: Jun 2011
Posts: 57
Talking MClass EQ improvements

RTA displayed behind M-Class Equalizer Filter graph in a darker red.
The RTA graph should show the post-filtered signal.

A switch on the low shelf that changes it to a high-pass filter
A switch on the high shelf that changes it to a low-pass filter.

When the shelves are in pass mode the Q knob changes the slope depth of the filter. The filter slope should be able to be smoothly warped between -6dB/Octave to -60dB/Octave, using a floating point multiplier, so that you might have a slope that is not strictly an integer multiple of 6.

Remove the cutoff frequency limits so that you can set your shelves or your pass modes to whatever frequency. I suppose in order to do this well, you'll need to change the way the audio buffer is filtered to ensure that there is no audible digital stepping.

these are my thoughts, thanks for listening!
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
RoughRider vs FET vs MClass sschechter Phead User Forum (read only) 16 2012-07-17 20:00
mclass vs parametric and cpu of reasons synths? cybernetictorture Phead User Forum (read only) 28 2009-06-18 00:48
mclass stereo imager vs. mono compatibility (?) belbeeta General Forum (read only) 4 2005-04-10 05:06


All times are GMT +2. The time now is 19:06.